收藏本站
Partly Order Discontinued as of August 31, 2012
PM5S-A/S/M
Operation type
Operation
Turn the operation selector to OC .
Timing operation starts when terminals A1 – B1 are connected while
Time chart
power is ON.
Control output is turned on after the set time, the pulse is 0.5 to 1.0 s.
Power supply
Signal A1-B1
ON
ON
0.5-1.0S
One-cycle
OC
Relay output
(NO contact)
OUT. LED
T
T
t 1
POWER LED
Note: Keep 0.1s or more for power off time.
Keep 0.05s or more for signal, input time.
PM5S-S
? LED lighting
? T: Setting time
LED flickering ?
?
Operation type
Operation
Time chart
When power is applied continuously, the time cycle begins. The out-
put contacts change state after the time delay is completed.
Power supply
ON
Power ON-delay
Time-out relay output
(NO contact)
T
ON
OUT. LED
POWER LED
Modes and time setting
1) Operation mode setting [PM5S-A]
6 operation modes are selectable with
operation mode selector.
Turn the operation mode selector with
screw driver.
Operation mode is shown up through the
window above the mode selector. The
marks are ON , FL , FO , SF , OS , OC . Turn
the mode selector to the mark until you
can check by clicking sound.
Confirm the mode selector position if it is
correct.
If the position is not stable, the timer
might mis-operate.
PM5S
2) Time setting [common]
16 time ranges are selectable between
1s to 500h.
Turn the time range selector with the
screw driver.
Clockwise turning increases the time
range, and Counter-clockwise turning
decrease the time range.
Confirm the range selector position if it is
correct.
PM5S
3) Time setting [common]
To set the time, turn the set dial to a
desired time within the range.
Instantaneous output will be on when the
dial is set to “0”.
When the instantaneous output is used,
the dial should be set under “0” range.
(Instantaneous output area)
When power supply is on, the time
range, setting time and operation mode
cannot be changed.
Turn off the power supply is applied to
set the new operation mode.
To set the time in the range, turn the dial
to a desired time scale. Do not turn the
dial beyond the stopper.
? Cautions for Time setting/Operating
mode setting
1) Time chart
? T shots setting time, t1 and t2 means
the time in setting time. (t1, t2<T)
? When the output relay is turned on, No
contact is closed and NC contact is
opened.
? LED indication shows “Turn ON”
2) Timing operation starts when power is
applied to terminals A1 – B1
Input signal time should be taken over
0.05 sec.
Short-circuited condition: Max. 1k ?
Open-circuited condition: Min. 100k ?
All Rights Reserved ? C OPYRIGHT Matsushita Electric Works, Ltd.
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
PMKEY ENCLOSURE KEY DOUBLE BAR METAL
PMR-8088 ADJUSTABLE MOUNT RAIL 75.25"PAIR
PMR-9454 RAILS PANL MOUNTNG 78.75" 1 PAIR
PMR-9484 RAILS PANLMNT L-SHPD78.75" 1PAIR
PMS 102 0163 PH SCREW MACHINE PHIL 10-32X1 5/8
PQ1A-12V RELAY GEN PURPOSE SPST 5A 12V
PR22MA11NTZF RELAY SSR 120V 150MA 6-DIP
PR308S41ESU RELAY SSR 240VAC 8A ZC 4-SIP
相关代理商/技术参数
PM5SGDW6 功能描述:LED面板上的指示器 Supr Gn 568nm 110mcd Diff Lens Wire RoHS:否 制造商:Dialight LED 大小:3 mm 照明颜色:Green 透镜颜色/类型:Diffused 波长:565 nm 正向电流:12 mA 正向电压:5 V 封装:Bulk
PM5SGTW15-CC 功能描述:LED面板上的指示器 Supr Gn 568nm 250mcd Tinted Lens Wire&Con RoHS:否 制造商:Dialight LED 大小:3 mm 照明颜色:Green 透镜颜色/类型:Diffused 波长:565 nm 正向电流:12 mA 正向电压:5 V 封装:Bulk
PM5SGTW16-CC 功能描述:LED面板上的指示器 Supr Gn 568nm 250mcd Tinted Lens Wire&Con RoHS:否 制造商:Dialight LED 大小:3 mm 照明颜色:Green 透镜颜色/类型:Diffused 波长:565 nm 正向电流:12 mA 正向电压:5 V 封装:Bulk
PM5SGTW3.0-CC 功能描述:LED面板上的指示器 Supr Gn 568nm 250mcd Tinted Lens Wire&Con RoHS:否 制造商:Dialight LED 大小:3 mm 照明颜色:Green 透镜颜色/类型:Diffused 波长:565 nm 正向电流:12 mA 正向电压:5 V 封装:Bulk
PM5SGTW3-CC 功能描述:PANEL MOUNT ASSEMBLY RoHS:是 类别:光电元件 >> 面板指示器，指示灯 系列:PM5 标准包装:50 系列:- 透镜颜色:绿 面板切口尺寸:6.4mm（圆形） 电压:24V 形状:圆形 类型:LED
PM5SGTW6-CC 功能描述:LED面板上的指示器 Supr Gn 568nm 250mcd Tinted Lens Wire&Con RoHS:否 制造商:Dialight LED 大小:3 mm 照明颜色:Green 透镜颜色/类型:Diffused 波长:565 nm 正向电流:12 mA 正向电压:5 V 封装:Bulk
PM5S-M 制造商:NAIS 制造商全称:Nais(Matsushita Electric Works) 功能描述:TEMPORIZZATORI PER GUIDA DIN
PM5S-M-24-240V 制造商:PANASONIC ELECTRIC WORKS - ACSD 功能描述:TIMER RELAY ANALOG 24-240V DIN 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:TIMER RELAY ANALOG 24-240V DIN 制造商:Panasonic Electric Works 功能描述:Din 24 Size Multi-Range Analog Timer